Drying Conditions
Non-hygroscopic — pre-drying is generally not required.
Melt Temperature
180~230°C
Mold Temperature
20~50°C
Shrinkage
No data
Common Defects & First Checks
Warpage
TPO: thermoplastic olefin, automotive bumper/trim, good impact at low temp.
Sink Mark
TPO: thermoplastic olefin, automotive bumper/trim, good impact at low temp.
Field Notes
TPO: thermoplastic olefin, automotive bumper/trim, good impact at low temp.
Related Resins
This data is a field-reference summary. Always verify against the resin manufacturer’s official TDS.