← Resin Library
PE(LLDPE)
CommodityCrystallineHygroscopicity NoneField Estimate
Estimate a PE(LLDPE) defect cause from a photo Drying Conditions
Non-hygroscopic, pre-drying is generally not required.
Melt Temperature
180~240°C
Mold Temperature
20~60°C
Shrinkage
No data
Common Defects & First Checks
Sink Mark
LLDPE: better impact than HDPE, used in film/flexible parts.
Warpage
LLDPE: better impact than HDPE, used in film/flexible parts.
Field Notes
LLDPE: better impact than HDPE, used in film/flexible parts.
Related Resins
Keep using it on the floor. Your estimate history and machine conditions build up in the app.
5 free estimates when you sign up
This data is a field-reference summary. Always verify against the resin manufacturer’s official TDS.