Drying Conditions
Temperature
100°C
Time
4h
Target Moisture
N/A
A dehumidifying dryer is recommended (relatively hygroscopic).
Melt Temperature
270~300°C
Mold Temperature
80~100°C
Shrinkage
No data
Common Defects & First Checks
Weld Line
PPE/PA blend: combines PPE heat resistance and PA chemical resistance.
Warpage
PPE/PA blend: combines PPE heat resistance and PA chemical resistance.
Field Notes
PPE/PA blend: combines PPE heat resistance and PA chemical resistance.
Related Resins
This data is a field-reference summary. Always verify against the resin manufacturer’s official TDS.